GYXTW Outdoor Armed Fiber Optic Cable
<
  • GYXTW Outdoor Armed Fiber Optic Cable
>

GYXTW Outdoor Armed Fiber Optic Cable

Description
  1. The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic.
  2. The tubes are filled with a water-resistant filling compound.
  3. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight.
  4. Two parallel steel wires are placed at the two sides of the steel tape.
  5. The cable is completed with a polyethylene (PE) sheath. 
Characteristics
  1. Good quality fiber ITU G652D 2-144 cores
  2. Steel wire used as the central strength member
  3. An aluminum polyethylene laminate( APL) moisture barrier
  4. Special tube filling compound ensure a critical protection of fiber
  5. Good mechanical and temperature performance, suitable for outdoor use
Fiber Parameter
  1. Buffer OD245±7μm
  2. Cladding OD125±1.0μm
  3. Fiber core OD62.5±2.5μm
  4. Attenuation@850nm3.50dB/km@13001.50dB/km
  5. bandwidth@850nm200MHz@1300600MHz
  6. Fiber attenuation non-uniformity0.1dB
  7. macro bend loss@100 circle 75mm OD0.50dB
  8. Laying mode : duct / aerial  
Structure chart

               
Structure Parameter
Core Jacket OD
mm
Weightkg/km Tension MaxN Crush Force MaxN/100mm Bending Radius Minmm Operation Temperature ()
Long Term Short Term Long Term Dynamic Static
2 8.3 66 600 1500 3000 20D 10D -40~+70
4 8.3 66 600 1500 3000 20D 10D
6 8.3 66 600 1500 3000 20D 10D
8 8.3 66 600 1500 3000 20D 10D
10 9.0 82 600 1500 3000 20D 10D
12 9.0 82 600 1500 3000 20D 10D

Product recommendation

No information